![]() ![]() Other models require you to connect your projection device to WiFi. Roku Streaming Stick + and Roku Express work best for projector use as they offer WiFi direct. You can connect Roku with a projector by plugging it into the HDMI port and connecting it to WiFi. If you are looking to make the most of your Roku, you might wonder if it would connect with your projector. Go to Product Repair.As many “cord cutters” switch to streaming devices like Roku to play their favorite shows from Netflix, Hulu, and other streaming services, new questions are being raised. If the issue still occurs, repair may be required. Make sure that the latest firmware version for your device is installed.ĭownloads are posted on your model support page.If possible, connect the Blu-ray Disc player to a different TV to see if the issue still occurs.Select this when you connect an audio device that doesn't support Dolby Surround (Pro Logic) or DTS Neo:6. Stereo: Outputs audio signals without surround effects.Select this when you connect an audio device that supports Dolby Surround (Pro Logic) or DTS Neo:6. Surround: Outputs audio signals with surround effects.There's no sound or audio when you connect a Blu-ray Disc player to the TV with an HDMI cable. On: Performs playback at a standard compression level.Other discs will play back at the On level. Auto: Performs playback at the dynamic range specified by the disc (BD-ROM only).Off: Outputs the sound with its original number of channels through the HDMI OUT jack.Cinema/Music: Outputs the simulated multi-channel sound from 2 channel sources via the HDMI OUT jack according to the capability of the connected device with DTS Neo:6 Cinema or DTS Neo:6 Music mode. ![]() Select this to output HD audio signals to an AV amplifier (receiver). On: Outputs the audio obtained when you mix interactive and secondary audio to the primary audio.Off: Outputs PCM signals from the HDMI OUT jack when you play a Super Audio CD.When you select On, no signal is output from other jacks. On: Outputs DSD signals from the HDMI OUT jack when playing a Super Audio CD.PCM: Outputs PCM signals from the DIGITAL OUT (COAXIAL)/HDMI OUT jack.Outputs audio signals according to the status of the connected devices. Set the BD Audio Mix setting of the Blu-ray player to On if there's no sound once the movie started.Īudio settings you can select in the Blu-ray player menu.If the volume is very low, select the Audio DRC or BD Audio Mix on the Blu-ray Disc player to Off.If the surround sound of the Blu-ray home theater system doesn't work, verify if there's no audio from the rear speakers or if you can listen to the Dolby Digital® technology 5.1 surround sound through your TV.Change this setting to see if the amplifier produces any sound.This applies if you connected an amplifier to the Blu-ray Disc player and the TV with an HDMI cable. ![]() Set the Audio (HDMI) or Digital Audio Output setting on the Blu-ray Disc player to PCM.This normally resolves playback issues with MPEG2 PS files.If you are playing an MPEG2 Program Stream (PS) file, turn off your Blu-ray Disc player and then turn it on again.The audio input available on the TV determines which cable you should use.If you are using an HDMI-to-DVI adapter or cable, you will need to connect a digital (optical or coaxial), or red and white analog cable to your devices to receive an audio signal.Set the speaker output to AV AMP if you have a BRAVIA™ TV. ![]()
0 Comments
Leave a Reply. |